You're reading the documentation for a development version.
For the latest stable release version, please have a look at master.

UART

Introduction

The UART protocol could be used, for instance, to emit and receive RS232 / RS485 frames.

There is an example of an 8 bits frame, with no parity and one stop bit :

../../../_images/uart.png

Bus definition

case class Uart() extends Bundle with IMasterSlave {
  val txd = Bool() // Used to emit frames
  val rxd = Bool() // Used to receive frames

  override def asMaster(): Unit = {
    out(txd)
    in(rxd)
  }
}

UartCtrl

An Uart controller is implemented in the library. This controller has the specificity to use a sampling window to read the rxd pin and then to using an majority vote to filter its value.

IO name

direction

type

Description

config

in

UartCtrlConfig

Used to set the clock divider/parity/stop/data length of the controller

write

slave

Stream[Bits]

Stream port used to request a frame transmission

read

master

Flow[Bits]

Flow port used to receive decoded frames

uart

master

Uart

Interface to the real world

The controller could be instantiated via an UartCtrlGenerics configuration object :

Attribute

type

Description

dataWidthMax

Int

Maximal number of bit inside a frame

clockDividerWidth

Int

Width of the internal clock divider

preSamplingSize

Int

Specify how many samplingTick are drop at the beginning of a UART baud

samplingSize

Int

Specify how many samplingTick are used to sample rxd values in the middle of the UART baud

postSamplingSize

Int

Specify how many samplingTick are drop at the end of a UART baud