You're reading the documentation for a development version.
For the latest stable release version, please have a look at master.

Dismiss

RISCV tool-chain

Binaries executed by the CPU can be defined in ASM/C/C++ and compiled by the GCC RISCV fork. Also, to load binaries and debug the CPU, an OpenOCD fork and RISCV GDB can be used.

RISCV official tools : https://github.com/riscv/riscv-wiki/wiki/RISC-V-Software-Status

OpenOCD fork : https://github.com/Dolu1990/openocd_riscv

Software examples : https://github.com/Dolu1990/pinsecSoftware

OpenOCD/GDB/Eclipse configuration

About the OpenOCD fork, there is the configuration file that could be used to connect the Pinsec SoC : https://github.com/Dolu1990/openocd_riscv/blob/riscv_spinal/tcl/target/riscv_spinal.cfg

There is an example of arguments used to run the OpenOCD tool :

openocd -f ../tcl/interface/ftdi/ft2232h_breakout.cfg -f ../tcl/target/riscv_spinal.cfg -d 3

To debug with eclipse, you will need the Zylin plugin and then create an “Zynlin embedded debug (native)”.

Initialize commands :

target remote localhost:3333
monitor reset halt
load

Run commands :

continue