You're reading an old version of this documentation.
For the latest stable release version, please have a look at master.

RAM/ROM

Syntax

To create a memory in SpinalHDL, the Mem class should be used. It allows you to define a memory and add read and write ports to it.

The following table shows how to instantiate a memory:

Syntax

Description

Mem(type : Data,size : Int)

Create a RAM

Mem(type : Data,initialContent : Array[Data])

Create a ROM. If your target is an FPGA, because the memory can be inferred as a block ram, you can still create write ports on it.

Note

If you want to define a ROM, elements of the initialContent array should only be literal values (no operator, no resize functions). There is an example here.

Note

To give an initial content to a RAM, you can also use the init function.

The following table show how to add access ports on a memory :

Syntax

Description

Return

mem(address) := data

Synchronous write

mem(x)

Asynchronous read

T

mem.write(
address
data
[enable]
[mask]
)

Synchronous write with an optional mask. If no enable is specified, it’s automatically inferred from the conditional scope where this function is called

mem.readAsync(
address
[readUnderWrite]
)

Asynchronous read with an optional read under write policy

T

mem.readSync(
address
[enable]
[readUnderWrite]
[clockCrossing]
)

Synchronous read with an optional enable, read under write policy and clockCrossing mode

T

mem.readWriteSync(
address
data
enable
write
[mask]
[readUnderWrite]
[clockCrossing]
)
Infer a read/write port.
data is written when enable && write.
Return the read data, the read occurs when enable is true

T

Note

If for some reason you need a specific memory port which is not implemented in Spinal, you can always abstract your memory by specifying a BlackBox for it.

Important

Memory ports in SpinalHDL are not inferred but explicitly defined. You should not use coding templates like in VHDL/Verilog to help the synthesis tool to infer memory.

Here is a example which infers a simple dual port ram (32 bits * 256):

val mem = Mem(Bits(32 bits),wordCount = 256)
mem.write(
  enable  = io.writeValid,
  address = io.writeAddress,
  data    = io.writeData
)

io.readData := mem.readSync(
  enable  = io.readValid,
  address = io.readAddress
)

Read under write policy

This policy specifies how a read is affected when a write occurs in the same cycle to the same address.

Kinds

Description

dontCare

Don’t care about the read value when the case occurs

readFirst

The read will get the old value (before the write)

writeFirst

The read will get the new value (provided by the write)

Important

The generated VHDL/Verilog is always in the ‘readFirst’ mode, which is compatible with ‘dontCare’ but not with ‘writeFirst’. To generate a design that contains this kind of feature, you need to enable the automatic memory blackboxing.

Mixed width ram

You can specify ports that access the memory with a width that is a power of two fraction of the memory width using these functions:

Syntax

Description

mem.writeMixedWidth(
address
data
[readUnderWrite]
)

Similar to mem.write

mem.readAsyncMixedWidth(
address
data
[readUnderWrite]
)

Similar to mem.readAsync, but in place to return the read value, it drive the data structure given as argument

mem.readSyncMixedWidth(
address
data
[enable]
[readUnderWrite]
[clockCrossing]
)

Similar to mem.readSync, but in place to return the read value, it drive the data structure given as argument

mem.readWriteSyncMixedWidth(
address
data
enable
write
[mask]
[readUnderWrite]
[clockCrossing]
)

Equivalent to mem.readWriteSync

Important

As for Read under write policy, to use this feature you need to enable the automatic memory blackboxing, because there is no universal VHDL/Verilog language template to infer mixed width ram.

Automatic blackboxing

Because it’s impossible to infer all ram kinds by using regular VHDL/Verilog, SpinalHDL integrates an optional automatic blackboxing system. This system looks at all memories present in your RTL netlist and replaces them with blackboxes. Then the generated code will rely on third party IP to provide the memory features, such as read during write policy and mixed width ports.

Here is an example of how to enable blackboxing of memories by default:

def main(args: Array[String]) {
  SpinalConfig()
    .addStandardMemBlackboxing(blackboxAll)
    .generateVhdl(new TopLevel)
}

If the standard blackboxing tools don’t do enough for your design, do not hesitate to create a git issue. There is also a way to create your own blackboxing tool.

Blackboxing policy

There are multiple policies that you can use to select which memory you want to blackbox and also what to do when the blackboxing is not feasible:

Kinds

Description

blackboxAll

Blackbox all memory.
Throw an error on unblackboxable memory

blackboxAllWhatsYouCan

Blackbox all memory that is blackboxable

blackboxRequestedAndUninferable

Blackbox memory specified by the user and memory that is known to be uninferable (mixed width, …).
Throw an error on unblackboxable memory

blackboxOnlyIfRequested

Blackbox memory specified by the user
Throw an error on unblackboxable memory

To explicitly set a memory to be blackboxed, you can use its generateAsBlackBox function.

val mem = Mem(Rgb(rgbConfig),1 << 16)
mem.generateAsBlackBox()

You can also define your own blackboxing policy by extending the MemBlackboxingPolicy class.

Standard memory blackboxes

Here are the VHDL definitions of used blackboxes:

-- Simple asynchronous dual port (1 write port, 1 read port)
component Ram_1w_1ra is
  generic(
    wordCount : integer;
    wordWidth : integer;
    technology : string;
    readUnderWrite : string;
    wrAddressWidth : integer;
    wrDataWidth : integer;
    wrMaskWidth : integer;
    wrMaskEnable : boolean;
    rdAddressWidth : integer;
    rdDataWidth : integer
  );
  port(
    clk : in std_logic;
    wr_en : in std_logic;
    wr_mask : in std_logic_vector;
    wr_addr : in unsigned;
    wr_data : in std_logic_vector;
    rd_addr : in unsigned;
    rd_data : out std_logic_vector
  );
end component;

-- Simple synchronous dual port (1 write port, 1 read port)
component Ram_1w_1rs is
  generic(
    wordCount : integer;
    wordWidth : integer;
    clockCrossing : boolean;
    technology : string;
    readUnderWrite : string;
    wrAddressWidth : integer;
    wrDataWidth : integer;
    wrMaskWidth : integer;
    wrMaskEnable : boolean;
    rdAddressWidth : integer;
    rdDataWidth : integer;
    rdEnEnable : boolean
  );
  port(
    wr_clk : in std_logic;
    wr_en : in std_logic;
    wr_mask : in std_logic_vector;
    wr_addr : in unsigned;
    wr_data : in std_logic_vector;
    rd_clk : in std_logic;
    rd_en : in std_logic;
    rd_addr : in unsigned;
    rd_data : out std_logic_vector
  );
end component;

-- Single port (1 readWrite port)
component Ram_1wrs is
  generic(
    wordCount : integer;
    wordWidth : integer;
    readUnderWrite : string;
    technology : string
  );
  port(
    clk : in std_logic;
    en : in std_logic;
    wr : in std_logic;
    addr : in unsigned;
    wrData : in std_logic_vector;
    rdData : out std_logic_vector
  );
end component;

--True dual port (2 readWrite port)
component Ram_2wrs is
  generic(
    wordCount : integer;
    wordWidth : integer;
    clockCrossing : boolean;
    technology : string;
    portA_readUnderWrite : string;
    portA_addressWidth : integer;
    portA_dataWidth : integer;
    portA_maskWidth : integer;
    portA_maskEnable : boolean;
    portB_readUnderWrite : string;
    portB_addressWidth : integer;
    portB_dataWidth : integer;
    portB_maskWidth : integer;
    portB_maskEnable : boolean
  );
  port(
    portA_clk : in std_logic;
    portA_en : in std_logic;
    portA_wr : in std_logic;
    portA_mask : in std_logic_vector;
    portA_addr : in unsigned;
    portA_wrData : in std_logic_vector;
    portA_rdData : out std_logic_vector;
    portB_clk : in std_logic;
    portB_en : in std_logic;
    portB_wr : in std_logic;
    portB_mask : in std_logic_vector;
    portB_addr : in unsigned;
    portB_wrData : in std_logic_vector;
    portB_rdData : out std_logic_vector
  );
end component;

As you can see, blackboxes have a technology parameter. To set it you can use the setTechnology function on the corresponding memory. There are currently 4 kinds of technogy possible:

  • auto

  • ramBlock

  • distributedLut

  • registerFile