You're reading an old version of this documentation.
For the latest stable release version, please have a look at master.

Utils

Some utils are also present in spinal.core

State less utilities

Syntax

Return

Description

toGray(x : UInt)

Bits

Return the gray value converted from x (UInt)

fromGray(x : Bits)

UInt

Return the UInt value converted value from x (gray)

Reverse(x : T)

T

Flip all bits (lsb + n -> msb - n)

OHToUInt(x : Seq[Bool])
OHToUInt(x : BitVector)

UInt

Return the index of the single bit set (one hot) in x

CountOne(x : Seq[Bool])
CountOne(x : BitVector)

UInt

Return the number of bit set in x

MajorityVote(x : Seq[Bool])
MajorityVote(x : BitVector)

Bool

Return True if the number of bit set is > x.size / 2

EndiannessSwap(that: T[, base:BitCount])

T

Big-Endian <-> Little-Endian

OHMasking.first(x : Bits)

Bits

Apply a mask on x to only keep the first bit set

OHMasking.last(x : Bits)

Bits

Apply a mask on x to only keep the last bit set

OHMasking.roundRobin(
requests : Bits,
ohPriority : Bits
)

Bits

Apply a mask on x to only keep the bit set from requests.
it start looking in requests from the ohPriority position.
For example if requests is “1001” and ohPriority is “0010”, the roundRobin function will start looking in requests from its second bit and will return “1000”.
MuxOH (
oneHot : IndexedSeq[Bool],
inputs : Iterable[T]
)

T

Returns the muxed T from the inputs based on the oneHot vector.

PriorityMux (
sel: Seq[Bool],
in: Seq[T]
)

T

Return the first in element whose sel is True.

PriorityMux (
in: Seq[(Bool, T)]
)

T

Return the first in element whose sel is True.

State full utilities

Syntax

Return

Description

Delay(that: T, cycleCount: Int)

T

Return that delayed by cycleCount cycles

History(that: T, length: Int[,when : Bool])

List[T]

Return a Vec of length elements
The first element is that, the last one is that delayed by length-1
The internal shift register sample when when is asserted

BufferCC(input : T)

T

Return the input signal synchronized with the current clock domain by using 2 flip flop

Counter

The Counter tool can be used to easily instantiate a hardware counter.

Instantiation syntax

Notes

Counter(start: BigInt, end: BigInt[, inc : Bool])

Counter(range : Range[, inc : Bool])

Compatible with the x to y x until y syntaxes

Counter(stateCount: BigInt[, inc : Bool])

Starts at zero and ends at stateCount - 1

Counter(bitCount: BitCount[, inc : Bool])

Starts at zero and ends at (1 << bitCount) - 1

A counter can be controlled by methods, and wires can be read:

val counter = Counter(2 to 9) // Creates a counter of 8 states (2 to 9)
// Methods
counter.clear()               // Resets the counter
counter.increment()           // Increments the counter
// Wires
counter.value                 // Current value
counter.valueNext             // Next value
counter.willOverflow          // True if the counter overflows this cycle
counter.willOverflowIfInc     // True if the counter would overflow this cycle if an increment was done
// Cast
when(counter === 5){ ... }    // counter is implicitly casted to its current value

When a Counter overflows (reached end value), it restarts the next cycle to its start value.

Note

Currently, only up counter are supported.

CounterFreeRun builds an always running counter: CounterFreeRun(stateCount: BigInt).

Timeout

The Timeout tool can be used to easily instanciate an hardware timeout.

Instanciation syntax

Notes

Timeout(cycles : BigInt)

Tick after cycles clocks

Timeout(time : TimeNumber)

Tick after a time duration

Timeout(frequency : HertzNumber)

Tick at an frequency rate

There is an example of different syntaxes which could be used with the Counter tool

val timeout = Timeout(10 ms)  //Timeout who tick after 10 ms
when(timeout){                //Check if the timeout has tick
    timeout.clear()           //Ask the timeout to clear its flag
}

Note

If you instanciate an Timeout with an time or frequency setup, the implicit ClockDomain should have an frequency setting.

ResetCtrl

The ResetCtrl provide some utilities to manage resets.

asyncAssertSyncDeassert

You can filter an asynchronous reset by using an asynchronously asserted synchronously deaserted logic. To do it you can use the ResetCtrl.asyncAssertSyncDeassert function which will return you the filtred value.

Argument name

Type

Description

input

Bool

Signal that should be filtered

clockDomain

ClockDomain

ClockDomain which will use the filtered value

inputPolarity

Polarity

HIGH/LOW (default=HIGH)

outputPolarity

Polarity

HIGH/LOW (default=clockDomain.config.resetActiveLevel)

bufferDepth

Int

Number of register stages used to avoid metastability (default=2)

There is also an ResetCtrl.asyncAssertSyncDeassertDrive version of tool which directly assign the clockDomain reset with the filtred value.

Special utilities

Syntax

Return

Description

LatencyAnalysis(paths : Node*)

Int

Return the shortest path,in therm of cycle, that travel through all nodes,
from the first one to the last one