Types

Introduction

The language provides 5 base types and 2 composite types that can be used.

Base types : Bool, Bits, UInt for unsigned integers, SInt for signed integers, Enum.
Composite types : Bundle, Vec.

Those types and their usage (with examples) are explained hereafter.

About the fixed point support it’s documented there

Bool

This is the standard boolean type that correspond to a bit.

Declaration

The syntax to declare such as value is as follows:

Syntax	Description	Return
Bool()	Create a Bool	Bool
True	Create a Bool assigned with `true`	Bool
False	Create a Bool assigned with `false`	Bool
Bool(value : Boolean)	Create a Bool assigned with a Scala Boolean	Bool

Using this type into SpinalHDL yields:

val myBool = Bool()
myBool := False         // := is the assignment operator
myBool := Bool(false)   // Use a Scala Boolean to create a literal

Operators

The following operators are available for the Bool type

Operator	Description	Return type
!x	Logical NOT	Bool
x && y x & y	Logical AND	Bool
x \|\| y x \| y	Logical OR	Bool
x ^ y	Logical XOR	Bool
x.set[()]	Set x to True
x.clear[()]	Set x to False
x.rise[()]	Return True when x was low at the last cycle and is now high	Bool
x.rise(initAt : Bool)	Same as x.rise but with a reset value	Bool
x.fall[()]	Return True when x was high at the last cycle and is now low	Bool
x.fall(initAt : Bool)	Same as x.fall but with a reset value	Bool
x.setWhen(cond)	Set x when cond is True	Bool
x.clearWhen(cond)	Clear x when cond is True	Bool

The BitVector family - (`Bits`, `UInt`, `SInt`)

BitVector is a family of types for storing multiple bits of information in a single value. This type has three subtypes that can be used to model different behaviours:

Bits do not convey any sign information whereas the UInt (unsigned integer) and SInt (signed integer) provide the required operations to compute correct results if signed / unsigned arithmetics is used.

Declaration syntax

Syntax	Description	Return
Bits/UInt/SInt [()]	Create a BitVector, bits count is inferred	Bits/UInt/SInt
Bits/UInt/SInt(x bits)	Create a BitVector with x bits	Bits/UInt/SInt
B/U/S(value : Int[,width : BitCount])	Create a BitVector assigned with ‘value’	Bits/UInt/SInt
B/U/S”[[size’]base]value”	Create a BitVector assigned with ‘value’	Bits/UInt/SInt
B/U/S([x bits], element, …)	Create a BitVector assigned with the value specified by elements (see bellow table)	Bits/UInt/SInt

Elements could be defined as follows:

Element syntax	Description
x : Int -> y : Boolean/Bool	Set bit x with y
x : Range -> y : Boolean/Bool	Set each bits in range x with y
x : Range -> y : T	Set bits in range x with y
x : Range -> y : String	Set bits in range x with y The string format follow same rules than B/U/S”xyz” one
x : Range -> y : T	Set bits in range x with y
default -> y : Boolean/Bool	Set all unconnected bits with the y value. This feature could only be use to do assignments without the U/B/S prefix

You can define a Range values

Range syntax	Description	Width
(x downto y)	[x:y] x >= y	x-y+1
(x to y)	[x:y] x <= y	y-x+1
(x until y)	[x:y[ x < y	y-x

val myUInt = UInt(8 bits)
myUInt := U(2,8 bits)
myUInt := U(2)
myUInt := U"0000_0101"  // Base per default is binary => 5
myUInt := U"h1A"        // Base could be x (base 16)
                        //               h (base 16)
                        //               d (base 10)
                        //               o (base 8)
                        //               b (base 2)
myUInt := U"8'h1A"
myUInt := 2             // You can use scala Int as literal value

val myBool := myUInt === U(7 -> true,(6 downto 0) -> false)
val myBool := myUInt === U(myUInt.range -> true)

//For assignment purposes, you can omit the B/U/S, which also alow the use of the [default -> ???] feature
myUInt := (default -> true)                       //Assign myUInt with "11111111"
myUInt := (myUInt.range -> true)                  //Assign myUInt with "11111111"
myUInt := (7 -> true,default -> false)            //Assign myUInt with "10000000"
myUInt := ((4 downto 1) -> true,default -> false) //Assign myUInt with "00011110"

Operators

Operator	Description	Return
~x	Bitwise NOT	T(w(x) bits)
x & y	Bitwise AND	T(max(w(x), w(y) bits)
x \| y	Bitwise OR	T(max(w(x), w(y) bits)
x ^ y	Bitwise XOR	T(max(w(x), w(y) bits)
x(y)	Readbit, y : Int/UInt	Bool
x(hi,lo)	Read bitfield, hi : Int, lo : Int	T(hi-lo+1 bits)
x(offset,width)	Read bitfield, offset: UInt, width: Int	T(width bits)
x(y) := z	Assign bits, y : Int/UInt	Bool
x(hi,lo) := z	Assign bitfield, hi : Int, lo : Int	T(hi-lo+1 bits)
x(offset,width) := z	Assign bitfield, offset: UInt, width: Int	T(width bits)
x.msb	Return the most significant bit	Bool
x.lsb	Return the least significant bit	Bool
x.range	Return the range (x.high downto 0)	Range
x.high	Return the upper bound of the type x	Int
x.xorR	XOR all bits of x	Bool
x.orR	OR all bits of x	Bool
x.andR	AND all bits of x	Bool
x.clearAll[()]	Clear all bits	T
x.setAll[()]	Set all bits	T
x.setAllTo(value : Boolean)	Set all bits to the given Boolean value
x.setAllTo(value : Bool)	Set all bits to the given Bool value
x.asBools	Cast into a array of Bool	Vec(Bool(),width(x))

Masked comparison

Some time you need to check equality between a BitVector and a bits constant that contain hole (don’t care values).

There is an example about how to do that :

val myBits = Bits(8 bits)
val itMatch = myBits === M"00--10--"

Bits

Operator	Description	Return
x >> y	Logical shift right, y : Int	T(w(x) - y bits)
x >> y	Logical shift right, y : UInt	T(w(x) bits)
x << y	Logical shift left, y : Int	T(w(x) + y bits)
x << y	Logical shift left, y : UInt	T(w(x) + max(y) bits)
x.rotateLeft(y)	Logical left rotation, y : UInt	T(w(x))
x.resize(y)	Return a resized copy of x, filled with zero, y : Int	T(y bits)

UInt, SInt

Operator	Description	Return
x + y	Addition	T(max(w(x), w(y) bits)
x - y	Subtraction	T(max(w(x), w(y) bits)
x * y	Multiplication	T(w(x) + w(y) bits)
x > y	Greater than	Bool
x >= y	Greater than or equal	Bool
x < y	Less than	Bool
x <= y	Less than or equal	Bool
x >> y	Arithmetic shift right, y : Int	T(w(x) - y bits)
x >> y	Arithmetic shift right, y : UInt	T(w(x) bits)
x << y	Arithmetic shift left, y : Int	T(w(x) + y bits)
x << y	Arithmetic shift left, y : UInt	T(w(x) + max(y) bits)
x.resize(y)	Return an arithmetic resized copy of x, y : Int	T(y bits)

Bool, Bits, UInt, SInt

Operator	Description	Return
x.asBits	Binary cast in Bits	Bits(w(x) bits)
x.asUInt	Binary cast in UInt	UInt(w(x) bits)
x.asSInt	Binary cast in SInt	SInt(w(x) bits)

Vec

Declaration	Description
Vec(type : Data, size : Int)	Create a vector of size time the given type
Vec(x,y,..)	Create a vector where indexes point to given elements. this construct support mixed element width

Operator	Description	Return
x(y)	Read element y, y : Int/UInt	T
x(y) := z	Assign element y with z, y : Int/UInt

val myVecOfSInt = Vec(SInt(8 bits),2)
myVecOfSInt(0) := 2
myVecOfSInt(1) := myVecOfSInt(0) + 3

val myVecOfMixedUInt = Vec(UInt(3 bits), UInt(5 bits), UInt(8 bits))

val x,y,z = UInt(8 bits)
val myVecOf_xyz_ref = Vec(x,y,z)
for(element <- myVecOf_xyz_ref){
  element := 0   //Assign x,y,z with the value 0
}
myVecOf_xyz_ref(1) := 3    //Assign y with the value 3

Bundle

Bundles could be used to model data structure line buses and interfaces.

All attributes that extends Data (Bool, Bits, UInt, …) that are defined inside the bundle are considered as part of the bundle.

Simple example (RGB/VGA)

The following example show an RGB bundle definition with some internal function.

case class RGB(channelWidth : Int) extends Bundle{
  val red   = UInt(channelWidth bits)
  val green = UInt(channelWidth bits)
  val blue  = UInt(channelWidth bits)

  def isBlack : Bool = red === 0 && green === 0 && blue === 0
  def isWhite : Bool = {
    val max = U((channelWidth-1 downto 0) -> true)
    return red === max && green === max && blue === max
  }
}

Then you can also incorporate a Bundle inside Bundle as deeply as you want:

case class VGA(channelWidth : Int) extends Bundle{
  val hsync = Bool()
  val vsync = Bool()
  val color = RGB(channelWidth)
}

And finaly instanciate your Bundles inside the hardware :

val vgaIn  = VGA(8)         //Create a RGB instance
val vgaOut = VGA(8)
vgaOut := vgaIn            //Assign the whole bundle
vgaOut.color.green := 0    //Fix the green to zero
val vgaInRgbIsBlack = vgaIn.rgb.isBlack   //Get if the vgaIn rgb is black

If you want to specify your bundle as an input or an output of a Component, you have to do it by the following way :

class MyComponent extends Component{
  val io = Bundle{
    val cmd = in(RGB(8))    //Don't forget the bracket around the bundle.
    val rsp = out(RGB(8))
  }
}

Interface example (APB)

If you want to define an interface, let’s imagine an APB interface, you can also use bundles :

class APB(addressWidth: Int,
          dataWidth: Int,
          selWidth : Int,
          useSlaveError : Boolean) extends Bundle {

  val PADDR      = UInt(addressWidth bits)
  val PSEL       = Bits(selWidth bits)
  val PENABLE    = Bool()
  val PREADY     = Bool()
  val PWRITE     = Bool()
  val PWDATA     = Bits(dataWidth bits)
  val PRDATA     = Bits(dataWidth bits)
  val PSLVERROR  = if(useSlaveError) Bool() else null   //This wire is created only when useSlaveError is true
}

// Example of usage :
val bus = APB(addressWidth = 8,
              dataWidth = 32,
              selWidth = 4,
              useSlaveError = false)

One good practice is to group all construction parameters inside a configuration class. This could make the parametrization much easier later in your components, especially if you have to reuse the same configuration at multiple places. Also if one time you need to add another construction parameter, you will only have to add it into the configuration class and everywhere this one is instantiated:

case class APBConfig(addressWidth: Int,
                     dataWidth: Int,
                     selWidth : Int,
                     useSlaveError : Boolean)

class APB(val config: APBConfig) extends Bundle {   //[val] config, make the configuration public
  val PADDR      = UInt(config.addressWidth bits)
  val PSEL       = Bits(config.selWidth bits)
  val PENABLE    = Bool()
  val PREADY     = Bool()
  val PWRITE     = Bool()
  val PWDATA     = Bits(config.dataWidth bits)
  val PRDATA     = Bits(config.dataWidth bits)
  val PSLVERROR  = if(config.useSlaveError) Bool() else null
}

// Example of usage
val apbConfig = APBConfig(addressWidth = 8,dataWidth = 32,selWidth = 4,useSlaveError = false)
val busA = APB(apbConfig)
val busB = APB(apbConfig)

Then at some points, you will probably need to use the APB bus as master or as slave interface of some components. To do that you can define some functions :

import spinal.core._

case class APBConfig(addressWidth: Int,
                     dataWidth: Int,
                     selWidth : Int,
                     useSlaveError : Boolean)

class APB(val config: APBConfig) extends Bundle {
  val PADDR      = UInt(config.addressWidth bits)
  val PSEL       = Bits(config.selWidth bits)
  val PENABLE    = Bool()
  val PREADY     = Bool()
  val PWRITE     = Bool()
  val PWDATA     = Bits(config.dataWidth bits)
  val PRDATA     = Bits(config.dataWidth bits)
  val PSLVERROR  = if(config.useSlaveError) Bool() else null

  def asMaster(): this.type = {
    out(PADDR,PSEL,PENABLE,PWRITE,PWDATA)
    in(PREADY,PRDATA)
    if(config.useSlaveError) in(PSLVERROR)
    this
  }

  def asSlave(): this.type = this.asMaster().flip() //Flip reverse all in out configuration.
}

// Example of usage
val apbConfig = APBConfig(addressWidth = 8,dataWidth = 32,selWidth = 4,useSlaveError = false)
val io = new Bundle{
  val masterBus = APB(apbConfig).asMaster()
  val slaveBus = APB(apbConfig).asSlave()
}

Then to make that better, the spinal.lib integrate a small master slave utile named IMasterSlave. When a bundle extends IMasterSlave, it should implement/override the asMaster function. It give you the ability to setup a master or a slave interface by a smoother way :

val apbConfig = APBConfig(addressWidth = 8,dataWidth = 32,selWidth = 4,useSlaveError = false)
val io = new Bundle{
  val masterBus = master(apbConfig)
  val slaveBus  = slave(apbConfig)
}

There is an example of an APB bus that implement this IMasterSlave :

//You need to import spinal.lib._ to use IMasterSlave
import spinal.core._
import spinal.lib._

case class APBConfig(addressWidth: Int,
                     dataWidth: Int,
                     selWidth : Int,
                     useSlaveError : Boolean)

class APB(val config: APBConfig) extends Bundle with IMasterSlave {
  val PADDR      = UInt(addressWidth bits)
  val PSEL       = Bits(selWidth bits)
  val PENABLE    = Bool()
  val PREADY     = Bool()
  val PWRITE     = Bool()
  val PWDATA     = Bits(dataWidth bits)
  val PRDATA     = Bits(dataWidth bits)
  val PSLVERROR  = if(useSlaveError) Bool() else null   //This wire is created only when useSlaveError is true

  override def asMaster() : Unit = {
    out(PADDR,PSEL,PENABLE,PWRITE,PWDATA)
    in(PREADY,PRDATA)
    if(useSlaveError) in(PSLVERROR)
  }
  //The asSlave is by default the flipped version of asMaster.
}

Enum

SpinalHDL support enumeration with some encodings :

Encoding	Bit width	Description
native		Use the VHDL enumeration system, this is the default encoding
binarySequancial	log2Up(stateCount)	Use Bits to store states in declaration order (value from 0 to n-1)
binaryOneHot	stateCount	Use Bits to store state. Each bit correspond to one state

Define a enumeration type:

object UartCtrlTxState extends SpinalEnum { // Or SpinalEnum(defaultEncoding=encodingOfYouChoice)
  val sIdle, sStart, sData, sParity, sStop = newElement()
}

Instantiate a enumeration signal and assign it :

val stateNext = UartCtrlTxState() // Or UartCtrlTxState(encoding=encodingOfYouChoice)
stateNext := UartCtrlTxState.sIdle

//You can also import the enumeration to have the visibility on its elements
import UartCtrlTxState._
stateNext := sIdle

Data (Bool, Bits, UInt, SInt, Enum, Bundle, Vec)

All hardware types extends the Data class, which mean that all of them provide following operators :

Operator	Description	Return
x === y	Equality	Bool
x =/= y	Inequality	Bool
x.getWidth	Return bitcount	Int
x ## y	Concatenate, x->high, y->low	Bits(width(x) + width(y) bits)
Cat(x)	Concatenate list, first element on lsb, x : Array[Data]	Bits(sumOfWidth bits)
Mux(cond,x,y)	if cond ? x : y	T(max(w(x), w(y) bits)
x.asBits	Cast in Bits	Bits(width(x) bits)
x.assignFromBits(bits)	Assign from Bits
x.assignFromBits(bits,hi,lo)	Assign bitfield, hi : Int, lo : Int	T(hi-lo+1 bits)
x.assignFromBits(bits,offset,width)	Assign bitfield, offset: UInt, width: Int	T(width bits)
x.getZero	Get equivalent type assigned with zero	T

Literals as signal declaration

Literals are generally use as a constant value. But you can also use them to do two things in a single one :

Define a wire which is assigned with a constant value

There is an example :

val cond = in Bool()
val red = in UInt(4 bits)
...
val valid = False          //Bool wire which is by default assigned with False
val value = U"0100"        //UInt wire of 4 bits which is by default assigned with 4
when(cond){
  valid := True
  value := red
}

Types

Introduction

Bool

Declaration

Operators

The BitVector family - (Bits, UInt, SInt)

Declaration syntax

Operators

Masked comparison

Bits

UInt, SInt

Bool, Bits, UInt, SInt

Vec

Bundle

Simple example (RGB/VGA)

Interface example (APB)

Enum

Data (Bool, Bits, UInt, SInt, Enum, Bundle, Vec)

Literals as signal declaration

The BitVector family - (`Bits`, `UInt`, `SInt`)