You're reading an old version of this documentation.
For the latest stable release version, please have a look at master.

Formal verification

General

SpinalHDL allows to generate a subset of the SystemVerilog Assertions (SVA). Mostly assert, assume, cover and a few others.

In addition it provide a formal verification backend which allows to directly run the formal verification in the open-source Symbi-Yosys toolchain.

Formal backend

You can run the formal verification of a component via:

import spinal.core.formal._
FormalConfig.withBMC(15).doVerify(new Component {
    // Toplevel to verify
})

Currently, 3 modes are supported :

  • withBMC(depth)

  • withProve(depth)

  • withCover(depth)

Installing requirements

To install the Symbi-Yosys, you have a few options. You can fetch a precompiled package at:

Or you can compile things from scratch :

Example

External assertions

Here is an example of a simple counter and the corresponding formal testbench.

import spinal.core._

//Here is our DUT
class LimitedCounter extends Component{
  //The value register will always be between [2:10]
  val value = Reg(UInt(4 bits)) init(2)
  when(value < 10){
    value := value + 1
  }
}

object LimitedCounterFormal extends App {
  // import utilities to run the formal verification, but also some utilities to describe formal stuff
  import spinal.core.formal._

  // Here we run a formal verification which will explore the state space up to 15 cycles to find an assertion failure
  FormalConfig.withBMC(15).doVerify(new Component {
    // Instanciate our LimitedCounter DUT as a FormalDut, which ensure that all the outputs of the dut are:
    // - directly and indirectly driven (no latch / no floating wire)
    // - allows the current toplevel to read every signal across the hierarchy
    val dut = FormalDut(new LimitedCounter())

    // Ensure that the state space start with a proper reset
    assumeInitial(ClockDomain.current.isResetActive)

    // Check a few things
    assert(dut.value >= 2)
    assert(dut.value <= 10)
  })
}

Internal assertions

If you want you can embed formal statements directly into the DUT:

class LimitedCounterEmbedded extends Component{
  val value = Reg(UInt(4 bits)) init(2)
  when(value < 10){
    value := value + 1
  }

  // That code block will not be in the SpinalVerilog netlist by default. (would need to enable SpinalConfig().includeFormal. ...
  GenerationFlags.formal {
    assert(value >= 2)
    assert(value <= 10)
  }
}

object LimitedCounterEmbeddedFormal extends App {
  import spinal.core.formal._

  FormalConfig.withBMC(15).doVerify(new Component {
    val dut = FormalDut(new LimitedCounterEmbedded())
    assumeInitial(ClockDomain.current.isResetActive)
  })
}

External stimulus

If your DUT has inputs, you need to drive them from the testbench. You can use all the regular hardware statements to do it, but you can also use the formal anyseq, anyconst, allseq, allconst statement:

class LimitedCounterInc extends Component{
  //Only increment the value when the inc input is set
  val inc = in Bool()
  val value = Reg(UInt(4 bits)) init(2)
  when(inc && value < 10){
    value := value + 1
  }
}

object LimitedCounterIncFormal extends App {
  import spinal.core.formal._

  FormalConfig.withBMC(15).doVerify(new Component {
    val dut = FormalDut(new LimitedCounterInc())
    assumeInitial(ClockDomain.current.isResetActive)
    assert(dut.value >= 2)
    assert(dut.value <= 10)

    // Drive dut.inc with random values
    anyseq(dut.inc)
  })
}

More assertions / past

For instance we can check that the value is counting up (if not already at 10):

FormalConfig.withBMC(15).doVerify(new Component {
  val dut = FormalDut(new LimitedCounter())
  assumeInitial(ClockDomain.current.isResetActive)

  // Check that the value is incrementing.
  // hasPast is used to ensure that the past(dut.value) had at least one sampling out of reset
  when(pastValid() && past(dut.value) =/= 10){
    assert(dut.value === past(dut.value) + 1)
  }
})

Assuming memory content

Here is an example where we want to prevent the value 1 from ever being present in a memory :

class DutWithRam extends Component{
  val ram = Mem.fill(4)(UInt(8 bits))
  val write = slave(ram.writePort)
  val read = slave(ram.readAsyncPort)
}

object FormalRam extends App {
  import spinal.core.formal._

  FormalConfig.withBMC(15).doVerify(new Component {
    val dut = FormalDut(new DutWithRam())
    assumeInitial(ClockDomain.current.isResetActive)

    // assume that no word in the ram has the value 1
    for(i <- 0 until dut.ram.wordCount){
      assumeInitial(dut.ram(i) =/= 1)
    }

    // Allow the write anything but value 1 in the ram
    anyseq(dut.write)
    clockDomain.withoutReset(){ //As the memory write can occur during reset, we need to ensure the assume apply there too
      assume(dut.write.data =/= 1)
    }

    // Check that no word in the ram is set to 1
    anyseq(dut.read.address)
    assert(dut.read.data =/= 1)
  })
}

Utilities and primitives

Assertions / clock / reset

Assertions are always clocked and disabled during resets. This also apply for assumes and covers.

If you want to keep your assertion enabled during reset you can do:

ClockDomain.current.withoutReset(){
  assert(wuff === 0)
}

Specifying the initial value of a signal

For instance, for the reset signal of the current clockdomain (usefull at the top)

ClockDomain.current.readResetWire initial(False)

Specifying a initial assumption

assumeInitial(clockDomain.isResetActive)

Memory content (Mem)

If you have a Mem in your design, and you want to check its content, you can do it the following ways :

// Manual access
for(i <- 0 until dut.ram.wordCount){
  assumeInitial(dut.ram(i) =/= X) //No occurence of the word X
}

assumeInitial(!dut.ram.formalContains(X)) //No occurence of the word X

assumeInitial(dut.ram.formalCount(X) === 1) //only one occurence of the word X

Specifying assertion in the reset scope

ClockDomain.current.duringReset {
  assume(rawrrr === 0)
  assume(wuff === 3)
}

Formal primitives

Syntax

Returns

Description

assert(Bool)

assume(Bool)

cover(Bool)

past(that : T, delay : Int)
past(that : T)

T

Return that delayed by delay cycles. (default 1 cycle)

rose(that : Bool)

Bool

Return True when that transitioned from False to True

fell(that : Bool)

Bool

Return True when that transitioned from True to False

changed(that : Bool)

Bool

Return True when that current value changed between comparred to the last cycle

stable(that : Bool)

Bool

Return True when that current value didn’t changed between comparred to the last cycle

initstate()

Bool

Return True the first cycle

Note that you can use the init statement on past:

when(past(enable) init(False)){ ... }

Limitations

There is no support for unclocked assertions. But their usage in third party formal verification examples seems mostly code style related.

Naming polices

All formal validation related functions return Area or Composite (preferred), and naming as formalXXXX. formalContext can be used to create formal related logic, there could be formalAsserts, formalAssumes and formalCovers in it.

For Component

The minimum required assertions internally in a Component for “prove” can be named as formalAsserts.

For interfaces implement IMasterSlave

There could be functions in name formalAssertsMaster, formalAssertsSlave, formalAssumesMaster, formalAssumesSlave or formalCovers. Master/Slave are target interface type, so that formalAssertsMaster can be understand as “formal verfication assertions for master interface”.